Guitars are the backbone of music. They have always been an attraction for creative musicians. Playing guitars is a calming experience and gives one a sense of accomplishment. From being a therapeutic instrument to a cost-effective gadget, guitars cannot be replaced for years to come! If you want to increase your creativity in music, they would be your best companion.
Many musical instrument brands have been introducing guitars, most of which are well-known and the talk of the town. The Canadian musical instrument company Godin has been introducing innovative guitars for 50 years. The company is quite famous in Quebec, Canada. Their tremendous journey started from a village, and now the company has become a family of 5 brands.
Today, their guitars have made a mark in the music industry. Introducing Godin’s A6 guitar has been the trendiest topic of discussion in the music industry lately! It is impossible for any brand to promise that its product is flawless. That also applies to the Godin A6 guitar.
Godin A6 Ultra Problems
Recently, the Godin A6 Ultra has been accused of problems that are easy to fix. Here, we’ll discuss the most common issues in Godin A6 Ultra and the best ways to fix them. Let’s get started right away!
- Low Output
The guitar’s built-in preamp creates a balance in the output power. Even though a broken tube amp is the most common cause of low output, other components can also pose problems if they are dirty, damaged, or not connected properly. Even if the amp and all other parts are in perfect working order, the guitar may still have a low output power.
Two jacks on the Godin A6 Ultra may be to blame for this. There must be a proper jack connection for the input cable to work correctly. This jack is responsible for making the tunes sound like they were being played on the accusing guitars.
There is a chance that you’ve connected your speakers or your amplifier to the wrong input jack. Most likely, it’s a straightforward problem like a loose wire or a defective component. Therefore, you must fix it immediately.
- Distortion
Godin A6 Ultra guitars are prone to distortion, which is also a common issue. Most users have no idea how to set it up correctly. To find out the root of the problem, distinguish each variable of the guitar. You can experiment with the same Godin A6 Ultra guitar with various amplifiers, cable, and audio interface setups. If the sound is distorted after adjusting each variable, it’s time to invest in a new guitar!
In most cases, the issue is with your guitar’s preamplifier. Keep an eye on the preamp settings and ensure everything is in working order before you hit the stage! Check all connections to the preamp if the problem persists. Some internal errors may be responsible for the distortions.
The output jack may also be to blame. So, please clean it and pick up the guitar again. If the distortion persists, you may need a new output jack. Make sure your guitar experience is completely distortion-free by using these tips.
- No Output At All
When the Godin A6 Ultra guitar fails to produce sound, its owners are understandably alarmed. In other words, the guitar is silent. The possibility of losing your studio or stage partner is a harrowing thought! First, start from scratch. Make sure the mute switch is turned on. If not, turn it back on. Ensure that all of the cords are correctly plugged in as well. If they don’t, they won’t work properly.
Take a look at your amplifier’s internal workings now. Ensure that the cables are in good condition. Replace them if they are damaged. Plug the guitar into the amp to see if it’s working correctly. You can also raise the volume by plugging the cable into the amplifier. A high-pitched hum can be heard when you touch the cable’s end with your finger. It’s a good sign that the amplifier and the cable are in good working order.
If everything else is working fine, why can’t I hear anything from my guitar? That means the speaker has gone out of commission. The output jack might be defective or has a loose connection. Wires in the speakers have corroded or rusted to the point where they no longer connect properly. As a result of wear and tear, the speaker wires or the jacks have degraded beyond repair and are no longer functional.
The battery should be the next item on your inspection list. A red battery indicator light is on most of Godin’s guitar’s expression systems. You can see the light on the preamp’s edge. The light shines on the instrument as soon as you plug in the guitar’s cable. If it does not, the battery may have been installed incorrectly, or you may have a poor battery.
The battery may have been installed improperly, or you may have a poor battery.
Removing and reinstalling batteries should be done carefully to avoid leaking acid into the battery housing.
If you’ve checked the amp, batteries, cables, and light indicator and still have no output, check the phase switch near the battery light. The outcome is usually halted when the phase switch is stuck in mid-travel. Just make your way to the sound of the Godin A6 Ultra guitar by flipping the switch.
- Pickguard Peeling Off
Customer satisfaction and the reliability of Godin’s guitars are of utmost importance to the company. Consequently, the Godin A6 Ultra has an embedded pickguard to protect the guitar’s finish from scratches across the top. Pickguards are typically made of plastic, though metal and other materials are occasionally used.
The pickguard is attached to the guitar with a weak adhesive. The Godin A6 Ultra guitar’s pickguard will not come off if there is no use of harmful solvents or brute force. If, however, the pickguard begins to detach from the guitar, do not attempt to reattach it with glue. There’s no need to panic; carefully peel the rest of it away.
After removing all the pickguards, thoroughly check the surrounding area for any adhesive that might have piled up. Use a mild abrasive to remove the remaining adhesive residue to prepare for installing a new pickguard. You can avoid many headaches by ordering the same pickguard from Godin for your Godin A6 Ultra guitar.
- Bad Intonation
The way your guitar’s pitch rises and falls as you play is what we mean when we talk about intonation. It’s pointless to play the guitar that is out of tune!
The 12th fret, the position where the neck meets the guitar body, is the most common place to notice if the guitar’s intonation is out of whack. An electronic tuner can check the open string’s pitch against the octave, revealing whether or not they are in tune. In the event of a problem, make sure the saddles are in good condition.
A guitar’s action and intonation, as well as its tone, are greatly influenced by the saddle. Saddles can be adjusted for both length and height. A tiny hex key can be used to modify the saddle’s height. In most cases, two hex nuts in each saddle are responsible for adjusting the action. Saddles have a Phillips head screw located at the back.
You must move the saddle forward and backward to adjust the string length. Strings with a bad intonation usually have a lot of funny saddle adjustments. Their length and height stand out compared to the rest of the strings.
A minor hex key or a Philips head screwdriver will work fine to make the necessary adjustments. All that’s required is a little slack in the string. Keep in mind that loosening the strings is all that’s needed, not removing them completely. It’s foremost to work on a flat surface to prevent your tools from slipping.
Lighting must also be adequate. Ensure the guitar’s body is cloth-covered to prevent damage from a tool striking the paint job. Upon completion of the project, use the tuner to recheck the instrument’s intonation.
- Won’t Stay In Tune
The guitar not staying in tune problem is a recurring one. When something goes wrong with your tuning, it can be extremely frustrating!
If your guitar’s strings keep slipping out of tune despite the correct intonation, this is your negligence. Is it possible that you’re doing a lot of crazy note bends, or are you completely unable to control the whammy bar? Players who are more aggressive should consider a more powerful tremolo system. Because of this, their tuning pegs have to be of the highest quality.
If you’re a gentle player, you should check the nut for any uneven spots that might catch the string. Usually, a nut traps the strings, and their sudden release causes the tune to be out of sync. There is a downside to this: if one string is wildly out of whack, it affects all the others.
To fix this problem, you can remove the strings and lubricate the slots with graphite. The smaller the slot, the better your results by rubbing a blackened piece of paper inside it. Now, you can restring the instrument to check if it is still in tune.
If your guitar is still out of tune, check the tuning pegs. A guitar peg’s intent is clear. To avoid slipping of string, they lock the string in place on the position instead of winding it around the traditional tuner. This eliminates the need to tighten the string twice.
Look at the ends of each peg. There’s a tiny screw in there somewhere. Tuning pegs can be tightened or loosened by using this. Let go of the strings from the guitar. Make sure that at least one of these pegs is spinning. Tighten the pegs if the spinning is free and no string is attached. It reduces the amount of resistance you feel when turning the pegs.
The Bottom Line
Godin guitars are known throughout the music industry for their versatility and durability. The Goldin A6 Ultra’s ability to produce high-quality sound sets it apart from the competition in the music industry. However, there are several issues that may stop it from working.
Because of this, we have outlined some of the most common causes of these issues, along with possible fixes. So that you keep on creating and appreciating great music!
My A6 ultra burns through batteries. Even though the 1/4 in Jack’s are disconnected it uses up the battery if left unattended.???? So I continue to take out battery when not playing.
I have a issue with the treble control…mid & bass is ok…..tone is up full on guitar and pa…sounds flat…there is a toneal difference,but very minimal