Without a shadow of a doubt, the guitar is a highly popular musical instrument. Thanks to its versatility and portability, it finds itself among the most widely played instruments all over the world. It can play music of all genres, and you can play a song even if it does not have a guitar part in it.
It comes in various types and has evolved a lot lately. A guitar amp is a useful tool that is used to strengthen the guitar signals. It may not be important for an amateur guitarist, but it is a great investment if you play at gigs. It improves your playability and makes sure your guitar’s signals are audible, even on big stages.
With that out of the way, Bugera is a household name in the guitar amps market. The company was founded in 2000 and has established itself as one of the industry leaders. With its powerful and innovative guitar amps, it has won thousands of guitarists.
Bugera has offered lots of durable and powerful guitar amps over the years. The Bugera 333XL Infinium is one of them. It is a cutting-edge amp that can be used to play pretty much every genre. However, it may show a few problems over time. If not eliminated, these problems can kill all the fun.
So, in this article, we will take a look at some of the common Bugera 333XL Infinium problems, their causes, and solutions. Let’s get started!
Solutions For The Bugera 333XL Problem
Below are some common issues with the Bugera 333XL Infinium guitar amp.
- LED Lights Going Off
The Bugera 333XL Infinium guitar amp features interactive LED lights for your best experience. They blink when you activate a certain feature of the amp. These LED lights usually work well. However, many users have stated that they do not illuminate or blink even when a specific feature is activated.
There are many reasons for failing LED lights. The LED lights may get fused after a while, or it may be due to water or drop damage. It could also be the result of a poor connection. So, start by checking if they are connected correctly. If they are not, they won’t work properly.
If your LED lights have fused, you will need to replace them. Go to your nearby hardware store and purchase the right LED lights for your Bugera 333XL Infinium guitar amp. Replacing the lights is a pretty simple process, and you do not really need any technical knowledge to install new lights on your own.
All you need is a screwdriver and a new set of lights. Take off all the screws using a screwdriver and install the new LED lights. And yes, keeping the screws in a small container is advised, so they do not get misplaced.
Once you have installed new lights, reassemble everything, and the LED lights on your Bugera 333XL Infinium guitar amp will start working normally.
- Boost Not Working
Another common problem that many users have complained about is that the boost of the Bugera 333XL Infinium guitar amp does not work sometimes. Essentially, it adds gain to your amp’s signals. In simple words, it increases the volume of your signal.
It is an important feature, especially for those players performing in large auditoriums. A clicking button controls the boost feature on the Bugera 333XL Infinium guitar amp. So, if it is not working, the chances are that there is something wrong with its button.
First of all, you need to make sure that the button is in good working condition. If it is damaged or broken, it may stop functioning, and you will have to replace the button to enjoy the boost feature again. If the boost button is fine, you may need to clean it as there might be some moisture or dust stuck inside.
If you have been using a guitar amp for a while, you’d know how easily they get dirty. Apart from the boost button, dust is the common reason behind any failing button. To clean the boost button, first, take it off by removing the screws holding it in place. Remember to keep the screws together in a box so you won’t have to find them later.
Next, get a contact cleaner and spray it carefully on your Bugera 333XL Infinium guitar amp. Once done, put it back to see if it has fixed the problem. If the problem persists, consider hiring a mechanic and let them deal with it.
- Tubes Blowing
The Bugera 333XL Infinium guitar amp comes with 4 x EL34 amp tubes to deliver a powerful performance. These tubes are vital to your amp’s performance as they amplify and shape the signals. They, along with the preamps, define the tonal characteristics of any guitar amp.
So, if they are out of order, you will need to repair them ASAP for the proper functioning of your amp. Low output is the most common symptom of a blown-out guitar amp tube. If your Bugera 333XL Infinium guitar amp is not giving enough power, even when fully cranked up, know there is something wrong with its tubes.
Aside from that, if you hear crackling sounds from your guitar amp, it also indicates a blown-out tube. A blown-out tube looks normal in most cases. However, if a certain tube looks damaged, it is a sign that it is the culprit.
If you cannot determine the culprit, consider replacing all the tubes one by one until your Bugera 333XL Infinium guitar amp starts working properly. Fortunately, replacing the tubes does not take much effort.
- Overheating
Overheating is a common problem that is not limited to the Bugera 333XL Infinium guitar amp only. Overusing is the primary reason behind overheating. If you keep using your amp for hours, the Bugera 333XL Infinium guitar amp will likely overheat.
Overheating can cause numerous problems for your Bugera 333XL Infinium guitar amp as it also affects other components. In addition to that, it can also lead to low output. So, give your amp some time to rest every time you use it.
If you face the overheating problem even without overusing your Bugera 333XL Infinium guitar amp, it may be due to blown-out speakers. If that’s the case, you will get a distorted or no sound. Whatever the reason, overheating is harmful to your amp, and you must fix it quickly.
So, replace your speakers, and it will likely resolve the issue. However, if you have replaced the speaker and your Bugera 333XL Infinium guitar amp is still overheating, you will need the help of an experienced technician to fix this issue.
A guitar amp is a complicated gadget; things can go wrong quickly if you do not have enough knowledge. A technician will diagnose the problem and fix it. And yes, make sure to disconnect the power before handling any repair.
The Bottom Line
The Bugera 333XL Infinium guitar amp is a modern-style amp with lots of innovative features. However, you may come across a few problems while using it. We have outlined all those common problems and their easy solutions in this article. Consider trying them before contacting Bugera customer service.