Technology has revolutionized every industry in this modern era, and the music industry is no exception. The music industry has seen lots of sophisticated gadgets to enhance the tones. They improve your playability and enable you to achieve your desired tones with minimum effort.
An audio mixer is an electronic device that allows you to combine, balance, and mix sound signals. It breathes life into your performance by adding cool effects to your tones. No matter how great a musician you are, a mixer can help you by enhancing the tonal characteristics. It has become quite ubiquitous lately.
Be it in recording studios or gigs; it is used everywhere. As musicians started investing in audio mixers, more and more companies started offering them. However, only a few enjoy a special place. Allen and Heath is one of the most prominent names in the audio effect mixers industry.
Based in the UK, Allen and Heath specializes in manufacturing top-quality audio mixing consoles. The company was established in 1969 and has been at the forefront of the audio mixer market over the last few decades. The Allen and Heath Mix Wizard audio mixers are among the market’s most widely used audio mixing consoles.
Thanks to its simple interface and groundbreaking features, this series is loved by professionals and learners alike. However, issues may pop up over time and spoil all the fun.
Today, we will look at some common Allen and Heath Mix Wizard audio mixer problems and their fixes so that you’d know what to do if you face any issues while using it. Let’s dig deeper!
Common Allen and Heath Mix Wizard Problems
Here are some common problems associated with the Allen and Heath Mix Wizard audio mixer.
- Output Signals Cutting Out
Like most mixers in the market, the Allen and Heath Mix Wizard audio mixer uses different outputs for the best experience, such as direct output, main output, etc. They come in handy, particularly during live performances, as they send signals to main speakers.
They can also be used when recording different inputs and mixing them. They work fine most of the time, but they cut out sometimes. The Allen and Heath Mix Wizard audio mixer has six output ports to connect multiple devices. If you notice that your output signals are cutting out, consider taking a look at these output ports.
These ports have soldering points, which may get deteriorated over time. If that’s the case, The good news for you is that it could be fixed easily. However, you will need to open your Allen and Heath Mix Wizard audio mixer to repair it. Take off all the screws first. Then, get a soldering gun and solder the points again.
This will likely resolve the issue, and you will get the proper output from your Allen and Heath Mix Wizard audio mixer. When done, install the screws again. However, the problem could be deeper if the soldering points are in good condition.
So, consider getting help from a trained professional. They will diagnose the problem and eliminate it, and you won’t face this problem again.
- Some Random Knobs Not Responding
Unresponsive knobs are another common problem with the Allen and Heath Mix Wizard audio mixer. This audio effects mixer features several knobs that enable you to control its features. However, many users have reported that they stop responding at times.
This problem could be a huge frustration for the user as they won’t be able to adjust frequencies. So, what to do if the knobs of your Allen and Heath Mix Wizard audio mixer are not responding? Start by visually inspecting their condition. If they are damaged or broken, they won’t respond properly.
If so, replacing them will fix the problem. It is seen that the knobs on this audio mixer are not durable enough, and they can get damaged easily, especially if you use the mixer regularly. However, if they seem intact, the chances are that your Allen and Heath Mix Wizard audio mixer needs cleaning.
If you use it often, it may get dirty over time. It’s not your fault, though; dust particles may get stuck inside as you use it and disrupt the normal functionality of the knobs. Fortunately, cleaning the Allen and Heath Mix Wizard audio mixer is an absolute cinch, and you can do it at home.
First, you will need to remove the problematic knob by taking off its screws. Once you have removed it, clean it with an abrasive cleaning agent. Investing in a special contact cleaner spray is recommended for this purpose as it will clean your audio mixer efficiently.
In addition to that, poor connections can also be the reason for unresponsive knobs. So, examine all the connections and make sure everything is connected correctly. Check if they need soldering, and if they do, solder them using a soldering gun. This will surely fix the problem.
- Meter Light Not Working
The Allen and Heath Mix Wizard audio mixer comes with a meter light that shows your preferences and their levels. It is helpful as you no longer need to engage the knobs to check levels. However, the meter light does not work at times. The problem is with the bulb more often than not.
So, check the bulb under the meter and replace it if it is fused. And yes, make sure to buy a quality bulb, or you will need to replace it again after a few months. Replacing a bulb is a pretty straightforward affair, and you don’t need to hire a professional for this purpose.
- Not Turning On
Another problem many users have complained about is that the Allen and Heath Mix Wizard audio mixer does not turn on sometimes. No matter how often you try, it just refuses to turn on. This could be frustrating for you, especially if you were to perform live.
If your Allen and Heath Mix Wizard audio mixer is not turning on, see if its wires are really plugged in or not. It does not run on a battery, so it won’t turn on if it is not appropriately connected to the power supply. If anything is not connected properly, make the necessary adjustments, and it will start working again.
Furthermore, check the power button and look for any signs of damage. The power button switches the Allen and Heath Mix Wizard audio mixer on and off. It needs to be in good working condition for the proper functioning of your audio mixer. If it is broken or burnt, simply replace it, and your audio effect mixer will turn on.
The problem could be with the socket if the power button is fine. So, plug your Allen and Heath Mix Wizard audio mixer into some other socket, and it will fix the problem.
The Bottom Line
The Allen and Heath Mix Wizard audio mixer series stands out for its ease of use and excellent features. However, you may run into a few problems while using it.
We have mentioned the problems and their simple fixes that have worked for many users. Consider seeking professional help if the aforementioned solutions do not fix the problem.