If you’re looking for a reliable microphone booster, you should absolutely consider going with Cloudlifter. It has a straightforward and easy-to-use interface that works on a plug-and-play strategy. It does not require any external power source to start working either. First, you just have to attach the input source from the mic to one side of the Cloudlifter.
Secondly, the output device is connected to the other end of the Cloudlifter. Once Cloudlifter is connected at both ends, it will start working right away. You will get the desired results and quality. Other microphone boosters like non-phantom power-driven microphones can not offer you such good boosted sound quality.
Cloudlifter performs its job superbly well, and it has proven itself to be the right fit for the job. You just have to attach your microphone with it and get the perfect output quality. It provides 25dB of clear, clean, and transparent output even if you have connected it with low-output dynamic ribbons or other mics such as tube microphones.
Another fantastic benefit of the Cloudlifter microphone booster is that it is compatible with many mixing consoles and other devices. It has a perfect noise canceling system along with boosting your audio’s depth.
It offers a soothing and clear audio experience that will be best suited for your desired output. This audio output quality is consistent, and you will never notice any letdown.
Does Cloudlifter Need Phantom Power?
Phantom power is used to amplify signals, and it doesn’t need any external source of power to be attached. It is a powerful solution used in many devices such as microphone boosters. With the mechanical power generated by the conversion of direct current to make it travel through the signal lines of the XLR cable, the audio output is boosted.
Here the power source is not visible. That’s why it is called phantom. Phantom power is required for Cloudlifters to function. The active motherboard is powered by the device’s 48 volts provided by phantom power. Thus, the mic being used with it is given a boost.
If you are a podcaster looking to travel light, you’ll need to ensure you have a device that can deliver the power needed. However, if you combine the weight of both these devices, even with the phantom power box, the total weight will be much less than the preamp. It saves you from the hassle of dragging the heavy preamp here and there.
Common Cloudlifter Problems
As every electronic device is subjected to some problems over time, your Cloudlifter can also stop working or face other problems. These problems can cause trouble for you, and you may get annoyed. There can be many problems associated with your Cloudlifter not working.
The Mini Input Problem
Some recorders have mini input (1/8th of an inch) for external devices like microphone boosters and mics. You may have one of these recorders. If you are trying to connect your Cloudlifter with these recorders, it is quite possible that the microphone booster might not work.
As Cloudlifter requires phantom power to work properly, that is why these mini-input cables can’t work with Cloudlifter. A strong, balanced, three conductor mic cable is required for phantom power-driven mics and boosters. These mini-input cables cannot send phantom power, so the adapters fail to work.
This might be the reason your Cloudlifter is not working. Check if you are attaching it with a mini input cable.
Cloudlifter Doesn’t Work With Condenser Mics
If you are using a condenser mic, you should know that Cloudlifter is incompatible with these mics. Condenser mics are themselves too loud, and adding an output booster like Cloudlifter may ruin the whole audio output and change the nature or tone of input. Condenser mics may not give desired output if you are using a very long cable.
It is because a microphone booster like Cloudlifter uses phantom power. This strong invisible power can not pass through these condenser mics, and hence there is no use in attaching Cloudlifter with a condenser mic.
So make sure you attach your Cloudlifter microphone booster only with mics it is compatible with, and don’t use it with condenser mics.
Troubleshooting Tips For Cloudlifter Not Working
You may face the above listed and some other problems with your Cloudlifter. Cloudlifter can stop working for many reasons, and there can be many underlying problems or connection issues. Like all other devices, you can also troubleshoot your Cloudlifter with proper methods.
Troubleshooting Cloudlifter may help you get rid of these problems. If your Cloudlifter is not working, you must consider some troubleshooting tips and ways.
- Check Connections
Cloudlifter comes with a simple plug-and-play connection system which is very straightforward. It is very easy to use Cloudlifter with many connectors and output or input devices. Still, there are many things that can go wrong while connecting your Cloudlifter with other devices. Sometimes there is something wrong with connection cables or ports.
On the other hand, the problem can arise if you are not connecting it in the right way. These faulty connections or the use of non-compatible cables or devices can lead to several problems. Cloudlifter not working is one of those problems which can occur due to issues in connectivity. It is very easy to avoid and get rid of these problems.
First, you should ensure that you are using the right cables and compatible input/output devices and mics. Then you have to manually check if all the connections are made correctly. The best way to ensure that all connections are attached perfectly is to take them off once and reconnect them again.
While connecting all the cables again, make sure that everything is connected in the right place. At the same time, look for any damaged or broken cables and connectors. If you find a damaged cable or connector, you should replace it before using your Cloudlifter.
Once you have done all this, your Cloudlifter will work properly. If this doesn’t solve your problem, there are other things to do to get proper signal output.
- Clean Connectors
Connectors play an essential role in making your Cloudlifter work properly. It is likely that there is something wrong with connectors if your Cloudlifter isn’t working. Sometimes dust and other particles like carbon can pile up on the connectors. In this condition, connectors might not work correctly.
You have to clean these connectors as soon as possible to avoid bigger problems. You must remove any dust or moisture present on the connectors. It is recommended to use a motherboard cleaning liquid or alcohol to clean these connectors.
Make sure you don’t rub vigorously because it can damage the surface of connectors. After using a liquid cleaner, let them dry properly before using them again.
- Internal Damages
The external body of the Cloudlifter is very tough, and there is no chance of it getting damaged. But inside, Cloudlifter is made up of a delicate network of wires and cables. The internal surface of this device can be damaged due to multiple reasons.
Any problem or damage to the internal wiring of the Cloudlifter can lead to many problems, and it can stop working. So it is essential to check the connections and wires present inside the Cloudlifter. It is an important step while troubleshooting. There may be some damaged or burnt wires inside your Cloudlifter causing the problem.
Make sure all the internal connections are correctly done. It will surely get your Cloudlifter to work again.
- Get it checked
Finally, if none of the tips and ways work for you, it is time to take your device to a professional. The repairing expert will check your device and find the exact problem with it. These professionals are trained for this and have a lot of experience.
They can check all the connections, cables, and connectors to determine which one is causing the problem. You will get your Cloudlifter fixed in no time.