If you are a music fanatic, you must be aware of the Fender Super-Sonic 22, which has been the hot subject in the market. The guitar amp has been used for various gigs and has a range of sounds that can give your ears the buzz they need.
The Fender Super-Sonic 22 is just another hot drop in the music industry and is known for being a low-cost, low-wattage but very high quality amplifier that takes the music experience to a whole new level.
If you really are looking for an amp, then the Fender supersonic 22 has been the go-to choice for most guitarists and has some serious potential to create jaw-dropping music.
However, regardless of its popularity amongst the guitarists and music professionals, the equipment did not make its mark without some criticisms from its users.
Apparently, the amp has been under scrutiny for some of its flaws; hence if you do decide to purchase one, you should know of the issues that you can encounter.
How to Fix Fender Supersonic 22 Problems
1. Doesn’t Switch On
Imagine you are super excited to get a new Fender Supersonic 22 and have probably saved up for it for months.
The day is finally here; when you purchase the equipment, you bring it home and align the band to kickstart your jamming session, only to find that it does not simply turn on.
Perhaps you are doing something wrong or did not read the manual? However, in some cases, you probably did everything right, yet the amp did not switch on. Chances are there is something wrong with the equipment itself.
In most cases, the wires are at fault. Sometimes during the manufacturing period, the wires do not connect properly with the amp resulting in no power.
Sometimes the ground wires are disconnected, broken, or improperly made. In other words, if your amplifier does not turn on, the wires are the culprit.
The best thing you can do in this situation is that you call an electrician who can have a look at these wires.
Most of the time, the issue is resolved during one inspection; however, if the problem persists, it is better to have it looked at by the brand’s profession.
If you have just purchased a new supersonic 22 amplifier, then it is recommended that you take the equipment to a Fender store, where the equipment will be fixed free of charge.
2. The Fender Supersonic 22 gets very hot while on
Sometimes we jam without realizing what is happening to our equipment; due to the passion and the urgency to produce a song, these things can slip out of our minds.
Perhaps you have noticed that the metal part of your amp is burning hot, which becomes concerning if you do not understand its cause.
Sometimes the supersonic 22 is not getting enough air to breathe, meaning your music equipment is housed in a room with poor ventilation; that is when you should rethink where to store the amplifier.
How can you fix the heating problem? The easiest solution to keep the heating levels low is to use it till its intended potential.
If you jam for hours at a stretch, the amp will likely get hot, but you can get rid of the issue if you give it breaks by turning it off after each session.
The second easiest thing you can do is have the fans on in the room. You can also get the 3 to 5 PC fans while your amplifier is kept in an open space.
3. Distorted Sound
The most annoying thing in the entire jamming experience is if the sounds don’t come out right. You may have experienced a time when you were thinking, what is that sound? It is definitely not you; rather, it comes from the music amplifier.
So what causes this? Normally such sounds are caused by clipping which is caused when there is a glitch between the amp and voltage from the electrical supply.
You can cause this phenomenon for a few reasons, one being that you are making your amp work a little too much, and it is now creating more energy than it is capable of.
The other reason you may experience bad sound quality is that you are playing the music very loud and hard.
You need to understand that although the Fender supersonic 22 is a high-end amplifier, it is definitely not designed to withstand harsh handling, as it has certain limits and maximum sound that it is capable of producing.
4. Footswitch Problems
When it comes to Fender supersonic 22, the footswitch is the most essential component of the equipment. The said tool helps the musician to switch from channels and gain distortion.
However, it does not mean that it comes without its own challenges. First things first, it is very easy for a footswitch to break once the signal is dropped, and you may realize this while you are jamming.
The solution lies in a trick; you must first open the pedal and check the connection once you get a replacement. Add that replacement in the spot for connection and ensure it is perfectly aligned.
5. Humming
Most people confuse distortion with humming; however, both are poles apart and cannot be compared to one another.
Musicians who experience humming while jamming express how annoying the sound can be, which can often throw people off their music game.
However, the good news is that you can fix the issue by putting the audio source system and amp plugged into only one electrical power point; this will instantly help you get rid of the humming problem at once.
Note that if it doesn’t work, you need to determine from which point the humming noise originates from. Furthermore, it would help if you inspect your amp for faulty wires or loose connections, which can also lead to the humming noise.
6. No Sound is Coming Out
The most frustrating part is when you are ready to start jamming with your friends or band, but there is no sound. Sometimes an amp may be turned on but refuses to let you hear anything and that is only due to the wiring issues.
In this situation, you need to check your ground wiring as it may not be getting the right signals. Sometimes if there is a voltage issue on the premises, it can also be the culprit behind the sound issue.
Maybe you are ready to play your music, but you have not checked that the power cable is disconnected or the RCA cords are damaged. Hence it is recommended that you inspect your equipment and its wiring before you start your jam session.
Sometimes taking the plug out and re-plugging can do wonders for you, too; hence try it.
7. Low volume
Although the Fender supersonic is a supreme music machine that makes your whole music experience much better, sometimes people complain that it has volume issues
Hence if you feel like you are not getting the right pitch of the sound and the volume is maxed out, then there is something wrong in the equalizer setting, or there is no connection between your guitar or the amplifier.
The solution for this is that you get your equalizer correct. If you don’t do this, you will get different sounds for each genre you play, but the settings are pretty easy.
Lastly, ensure that your guitar and amp are perfectly connected and that there are no loose wires.
8. Wonky Surround Sound
Fender Supersonic 22 is best known for its surround quality and its features. Still, sometimes the equipment can be glitchy and produce sound coming from different directions, resulting in a wonky noise.
What do you do then? The good thing is that this problem is easily manageable, as the core reason behind this issue is that the speakers are not properly aligned or positioned.
Furthermore, you must ensure that your audio source works with a Fender supersonic 22 amp.
The Bottom Line
If you really want an amp, go for Fender Supersonic 22; despite its issues, it promises great quality and a jaw-dropping jamming experience. It has all the advanced features you can ask for and has all a musician needs to make explosive music.