It goes without saying that the guitar looper is one of the most critical components of the music systems, thanks to its extraordinary functionality. It deals with the recordings of the performances. Not only that, but it can also play the recordings whenever you want.
On the basis of the performance delivered by the users, the looper can start overdubbing and create polyphonic landscapes. However, the quality and accuracy of the recordings are directly related to the quality of the looper. Anyone who’s into guitars must have heard of the Pigtronix Infinity Looper.
The use of modern technology in the devices and instruments of these brands has made them well-known among popular musicians. Pigtronix Infinity manufactures top-quality loopers that synchronize well with aggressive and dynamic genres. This brand has appealed to a large audience in no time.
The reason is that it not only adds more to the performance of the player, but it also enhances the audience experience. As on point as its features are, it also includes a few problems that can cause inconvenience for the users.
Therefore, if you own a Pigtronix Infinity looper, you must be aware of its troubleshooting tips so that you can deal with its problems effectively. Let’s study these tips one by one.
Pigtronix Infinity Looper Problems
- Pedal Not Working
The poor working of the pedal is something that is not only the problem, but it leads to other problems as well. Whenever the pedal is not working, it causes signal issues and generation of noise from the rig. In most cases, the problem with the pedal results from the amplifier or power issues.
You can run a test to see whether there is a problem with the pedal or not. Just connect the guitar with the am and listen for the sound. If the sound is reasonable, but as soon as you connect the pedal, there is distortion, then it means that your pedal is not working.
In order to fix this problem, you have to check the compatibility of the power supply for the pedal. Either the pedal is integrated with the power supply adaptor, or it is powered by a battery. If the latter is the case, you need to get rid of the old batteries and replace them with new ones.
On the other hand, if you are using the power adapter, you need to check the size/type of the adaptor and the current type. Make sure both of them are correct. In case you are not sure how to check the compatibility of adaptors, it is recommended to take out the manual and give it a read.
- The Looper Getting Stuck
Usually, there are no such problems with the hardware and the software of this looper, but it can still pose some uncomfortable situations for the users by getting stuck on the same loop. The looper keeps repeating all the previously recorded loops in clarity.
Most of the users have complained about the 5-minute memory of the looper on the board. It is indifferent to the number of firmware updates because it gets stuck even if your firmware is updated. The looper getting stuck leads to a number of problems.
The recording is significantly distorted because of the intermittent playback of old loops over the new one. It is obvious that the repetition of the same loop over and over again is quite frustrating for the users. Not only that, sometimes it accompanies a strange noise on the output, which is pretty disruptive to the performance.
As complicated as this problem sounds, the solution to it is pretty simple. You just have to run a factory reset. Keep the loop switch pressed for a while unless there is an orange blinking of the LED on the loop switch. This measure is likely to get rid of all the bugs and errors in the looper.
- Signals Dropping
The signals dropping issue is pretty common among the Pigtronix Infinity looper users. There is a possibility that as soon as the users activate the record button, the looper fails to do the recording. The loop per fails to catch the signal. As a result, the users are unable to do the solo over.
If you find yourself in the same situation, the first thing that you need to do is check out the cables. The main reason behind this problem could be the incorrect installation of the cables. So make sure that the cables are installed correctly.
If there is nothing wrong with the installation of the cables, check the condition of the cables. You need to make sure that they are intact. If there is any damage to the cables, get them replaced with the new ones. There is another solution that can get your signal problem resolved. It requires you to restart your looper.
All you have to do is just shut off the looper, wait for a while, and turn the unit on again. These troubleshooting tips are not likely to work great, but there is nothing wrong with trying.
- Looper Not Turning On
A large number of users have complained about the problem of the looper not turning on. Regardless of whichever equipment you are using, it is common to experience the issue of the unit not turning on. As far as Pigtronix Infinity looper is concerned, there might be something wrong with the battery that is preventing it from turning on.
Therefore, make sure that an appropriate battery is connected to the system. The next thing that you need to make sure of is that the battery is properly charged. After you are done checking the battery, turn the unit on. If the problem is still there, you should find another way to get the power to your looper.
In that case, the use of a power supply is recommended. The power supply will provide an uninterrupted supply of power to the looper and resolve its not turning issues.
- Making Noise
You cannot record the performance if the Pigtronix Infinity looper is making a noise. You need to check the power section of the amplifier to deal with this problem. It is recommended not to check out the electrical connections by yourself because it can get dangerous.
It is better to get in touch with a technician who can do the analysis for you. Take the entire guitar setup to the shop so that the technician can take a thorough look at the setup, find the root cause of the problem, and fix it efficiently.
- The Switch Is Not Operating
The switch becomes intermittent very often. If you face the same problem with your switch and it fails to turn on or turn off, there is a simple solution to it. Locate the side jack and screws in the looper and loosen them. You need to take a look at the inside of the switch. There are a few integrated circuits in there.
Check the no-contact switch with a blue top that has four contacts on its back. Use a non-flammable contact cleaner to clean the circuit. The next thing that you need to do is find the switch to the contact points. Get these points soldered. The switches need to be washed in the best way possible.