The advancements in technology have led to the launch of cams that come with mics. They are a great way to keep a record of your musical performances.
Zoom Q2N is one such cam that promises optimal performance both in terms of recording videos and working as an enhanced mic.
The lens of Zoom Q2N enables you to record 4K resolution on the video. Besides, the quality of audio recorded is pretty great as well, thanks to the built-in X/Y microphones in the unit.
Anyone who is looking for a device to record music videos with extraordinary quality can definitely trust Zoom Q2N. It won’t be wrong to call this camera the best one out there on the market.
The suitable size of this cam makes it fit in your palms perfectly. As great as the features of Zoom Q2N are, it also has a few problems that you need to be aware of.
The problems are not that huge, and they are quite easy to deal with. In this article, we will discuss the common Zoom Q2N issues and suggest effective solutions to resolve them.
Common Zoom Q2N Problems
1. Volume Too Low
The most common issue associated with the Zoom Q2N is that it records the audio at a very low volume.
The output of the audio is not that great. You can start looking for the cause of this problem by checking the connections first. Make sure that there is no loose connection.
The next thing that you should check on is an external device that you might have connected to the audio input jack on your Zoom Q2N. You need to adjust the volume levels of the output device in accordance with its input levels.
2. Recording Not Possible
Users of Zoom Q2N have encountered the problem of their cam not being able to record both audio and video. Most of the time, this problem requires you to check on the memory.
The Zoom Q2N comes with an SD card support that allows you to keep a record of audio and video files.
However, too many files can take up the memory and leave no space for any more recordings. As a result, the cam cannot do the recording.
It is recommended to keep a bunch of SD cards with you if you want to record longer videos. You can replace the stuffed card with an empty one and carry on your work.
3. Lag On Recording
Although the Zoom Q2N is highly functional and productive, it can still give you problems like lagging on recordings.
The main reason behind the lagging is the use of outdated firmware. You need to update the firmware so that the camera can record the videos without any lagging.
4. Lens Flare
The Zoom Q2N problem that can frustrate the customers the most is the lens flare that they get when they overhead the lighting. As you open the cam, there is a giant rainbow that comes into the play.
The reason behind this lens flare is the use of helpful lights right above the camera. As they shine directly down and get into the lens, there is a flare.
However, you can mask this flare by using a lens hood. The bad news is that the lens hood does not come with the product. You have to buy it separately for as much as $50.
If you own a Zoom Q2N camera, get a hold of the Zoom customer service and just complain about the fact that the lens hood should be included with the camera like it is with every professional lens.
If you send them an email like this, there is a chance that they might send you a lens hood for free.
There is another way by which you can deal with the lens flare. Use a simple guitar pick. Stick this pick to a suitable place on the camera with the help of a sticky tack.
As you put it on, check the lens flare, which is usually gone after this troubleshooting.
If you don’t have your hands on a guitar pick, you can use a piece of cardboard. Use tape to drape the piece of cardboard right over the top of the lens. It gives you a little hood over the lens.
5. Battery Issue
Any equipment that runs on a battery has to face battery issues once in a while. As far as the Zoom Q2N is concerned, you can check the problem by turning the camera on and booting up.
Now you need to notice the battery indicator. Suppose it has got two bars. Now start the recording and watch the ticker.
In just under 30 seconds, the battery changes, and now you are left with just one bar. Now stop the recording and turn the camera off.
Wait a few minutes and turn on the camera again. The battery indicator turns red. If you start recording, it will record the video, but the indicator is still red.
Besides, the advertisement for the Zoom Q2N cam says that it comes with a battery that can run for two hours.
However, that’s not the case. The battery can go for as long as one hour and ten minutes. This battery life is enough for one set of a band show.
You can solve the battery issue of Zoom Q2N by using the Panasonic Eneloop pro batteries. This is a great fix if you consider the cost of batteries and how much they consume.
With this battery, you can do the recording of 2hours of footage on 4k video/96k audio. If you want to have more battery time, you will have to reduce the quality.
Considering the breaks and turning on and off, this battery can give you 95% of a complete performance.
There is another option where you can use a USB power bank. Even the cheap USB power banks come with a battery of 2600 mAh. Attach the power bank right to the tripod.
As incredible as it may sound, it can let you record five and a half hours’ worth of video on your 64-gig memory card. With this battery, you can fill the entire memory and still have 25% of the battery left.
In case you cannot afford a power bank, you can always rely on rechargeable batteries. However, these batteries do not hold a full charge after some time.
6. Memory Card Problems
There is another problem that you might experience with the Zoom Q2N camera. If you are using the SanDisk class 10 memory card, it is possible that the light may go off. The camera fails to continue the recording.
Despite being a class ten, the card gets too slow. Although SanDisk is on the list of approved cards on the Zoom website, it can still pose some problems.
You can use the Lexar 633x card that comes with grand storage of 64GB. It works fine even if you have to continue the recording for five hours.
I wanted to record a very important concert. the playback had no sound
I also am unable to format an se card. Has anyone figure out an answer yet?
I got a Samsung MB-ME512KA/AM Micro SD Card. When I start format I get error message.
It will not format the card
I recently noticed a battery select option. I use rechargeable NiMH and it did not detect it. I’ve used alkaline too. Perhaps there is better battery life, or less noise with the proper setting chosen?